LAMINATING PRODUCTS | Epoxy Laminating Resins

Room temperature polymerization, Fire rating M3 and vertical position application.

Laminating of felt for the reinforcement and replacement of vertical and/or underground pipes with a polymerization without heating.

Laminating of felt for the reinforcement and replacement of vertical and/or underground pipes with a polymerization without heating

Room temperature polymerization and easy impregnation

Long pot life, low viscosity and good wetting

Composite structure made by filament winding and requiring a very good fatigue resistance

Versatile and multi-reactivity product. Thermal resistance up to 65

Multi-functional, easy to use, low viscosity and good wetting, hardening at room temperature , good adherence between successive lamination layers with EPO 95/C and EPO 95/S hardeners, variable reactivity.

Low exothermy. 2 different pot life.

EPOLAM 2001 with Hardener EPO 95C is used for production of tools, negatives etc. by laminating technologies. This resin-hardener-system has better thermal and mechanical properties than EPOLAM 2001 with standard harderner.

-

This epoxy low viscosity system is used for application at low temperature and in a moist environment.

Low exothermy & no odor.

This system is designed for the production of tools, negatives, casting or concrete.

Very long pot life. High elongation at break. Low viscosity.

Is dedicate to produce composite structure by resin transfer moulding (R.T.M.), filament winding, infusion and wet lay-up, requiring excellent fatigue and long term ageing.

Versatile epoxy system with a single resin and choice of 3 hardeners. Variable curing time, no foaming. Flexible.

Tooling for composites. Can be used as a gelcoat with additional fillers (casting, concrete).

Good compressive strength. Low density. good temperature resistance.

Liquid expoxy system to be filled with hollow glass micro spheres for massive casting of syntactic foam, up to 100mm.

-

This system with low viscosity is used for application at low temperature and in moist environment.

Production of composite structures by wet lay-up methods.

Marine composites. Composites parts. Aviation composites.

Good mechanical properties. Low viscosity. Llyod's approved. Compatible hardeners. Good behavior in moist environment.

Production of composite structures by wet lay-up method, infusion, vaccum and low pressure injection. Good behavior on wood impregnation and bonding.

Goog mechanical properties. Low viscosity. Compatible hardeners.

Production of composite structures by wet lay-up method, infusion, vaccum and low pressure injection.

High thermal resistance. Good chemical resistance. Good wettting and infiltrating performance. High thickness laminates. Curing at RT. Strong adhesion.

EPOLAM 2019 allows the production of composite moulds and structures by infusion methods.

Curing time adjusted by addition of an accelerator. Low viscosity. Good wetting.

Wet lay up applications and RTM.

Very good mechanical properties. Heat resistant. Low viscosity. Good wetting.

Impregnated lay up. Vacuum casting and reaction injection moulding.

Goog mechanical properties. Low viscosity. Excellent fabric wetting. Good temperature resistance.

Production of composite structures by impregnation hard layers, vaccum injection and low pressure injection methods.

Goog mechanical properties. Low viscosity. Excellent fabric wetting. Good temperature resistance.

Production of composite structures by impregnation hard layers, vaccum injection and low pressure injection methods.

Good mechanical properties. Can be used for tools up to 135

Heat resistant tooling.

Good mechanical resistance. Without aromatic amines. High temperature resistance. Good wetting reinforcements and fillers. Thick laminated possible.

EPOLAM 2025/2027 is formulated for structural composite applications, where thick sections are required with high temperature resistance.

Good wetting. Upright wall laminating. Good mechanical properties.

Tools production (moulds, jigs, negative forms) by wet lay-up methods.

Low viscosity system designed for the production of tooling by infusion.

Infusion resin designed for the production of tools in prepreg or RTM.

High thermal resistance. Good chemical resistance. High thickness laminates.

EPOLAM 2035 resin / 2027 hardener allows the production of composite moulds and structures by infusion methods.

Good behaviour in moist environment
Good wetting ability of balsa wood and fo

Production of composite structures by liquid resin infusion methods
Vacuum and low pressure injection
Filament winding

Heat resistant. Good wetting.

Tooling for composites. Concrete or casting.

Very heat resistant. Excellent wetting.

Composites structures. Prepreg moulds. Resin transfer moulding. Vacuum forming tooling.

Low viscosity system designed for the production of tooling by infusion.

Used in concrete by addition of aluminium or other fillers.

Infusion resin designed for the production of tools in high temperature prepreg.

Thermal resistance up to 200

Production of composite tooling and structures by the usual impregnation methods.

Self-extinguishing. FAR 25 compliant. Good mechanical properties.

Fire resistant composites. Engineering aircraft interior parts.

Self-extinguishing. FAR 25. Good mechanical properties. Temperature resistance. Short demoulding time.

EPOLAM 2500-2501 is a self extinguishing resin laminating system designed for the impregnation ot substrates used in aircraft interiors.

High thermal resistance. Good chemical resistance. High thickness laminates.

EPOLAM 5015 resin / 2025 hardener allows the production of composite moulds and structures by infusion methods.

Very low viscosity. Outstanding wetting ability of the reinforcements. Good behaviour in moist environment. Goog wetting ability of balsa wood and foams.

Production of composite structures by liquid resin infusion methods. Vaccum and low pressure injection.

Filament winding.

Infusion system, very low viscosity, excellent wetting for parts.

Production of large parts, boat hulls, wind turbine blades.

Filament Winding. RTM (Resin Transfert Moulding). Pressure Moulding. Wet lay-up. Pultrusion.

EPOLAM 8064 resin with EPOLAM 8045 hardener and accelerator 5X hardener exhibits a low mix viscosity at room temperature in combination with a long pot life. The system shows excellent fibre impregnation properties and easy to process.