CASTING RESINS | Epoxy Casting Resins

No post-cure heat treatment. Aluminium filler.

Vacuum forming moulds. RIM moulds.

Very good surface finish after machining. Aluminium filler. Low shrinkage .

Moules de thermoformage Injection mousse PU. Outillage RIM.

Medium viscosity long pot life higly resistant to abrasion and compression.

Foundry patterns and stamping dies and punches. Reproduction patterns. Mould masters.

Low shrinkage. High hardness. Excellent abrasion resistance.

Foundry patterns and core boxes. Positionning jigs. Reproduction patterns.

Different reactivity according to the choice of the hardener. High accuracy reproduction. Low shrinkage. High hardener. Very good abrasion resistance.

Realisation by casting of foundry patterns, modell slabs, core boxes, stamp tolling, mold reproduction, positionning blocks, insert embedding.

Low density. Good compression strength. Good temperature resistance.

Resin epoxy system filled with hollow glass micro spheres for massive of syntactic foam.

Low viscosity. Good wettability.

The low viscosity epoxy system is designed for production of concreter with mineral fillers such as granite, sand, aluminium and glass microspheres.

Very good mechanical characteristics, heat resistant.

Vacuum forming moulds. Thermoplastic injection moulds.

Very long pot-life. Low viscosity. Very good wetting (glass, carbon). High elongation at break.

Realisation of composite structures by filament winding, requiring excllet fatique (cyclic stregth) long term ageing (lighweight NGV pressure vessels, air-bottle for diving, etc.).

Warm curing system. Good physical strengths and adhesion. Low shrinkage on cure. Long working time. Good adhesion.

This system is an epoxy designed to provide a tough, flexible barrier liner in services at temperature up to about 50°C. The maximum operating pressure on the size of cracks and the conditions of the original pipe.

Warm curing system. Good physical strengths and adhesion. Long working time. WRc approuved according ISO 13566-4: 2002

This system is an epoxy designed to provide a tough, flexible barrier liner in services at temperature up to about 80°C.

Warm curing system. Good physical strengths and adhesion. Low shrinkage on cure. Long working time. Good adhesion.

This system is an epoxy designed to provide a tough, flexible barrier liner in services at temperature up to about 50°C. The maximum operating pressure on the size of cracks and the conditions of the original pipe.

Cold to warm curing system. Good physical strengths. Low shrinkage on cure. Fast cure with controlled exotherm. Good adhesion.

This system is an epoxy designed to provide a tough, flexible barrier liner in services at temperature up to about 75°C. The maximum operating pressure on the size of cracks and the conditions of the original pipe.

Cold & warm curing system; Fast cure at 30-40°C. Good physical strengths. Good adhesion to concrete, brick and ceramics. Low circular shrinkage on cure. Low odour. No VOC's, 100% solids.

This system is an epoxy designed to provide a tough, flexible barrier liner in services at temperature up to about 50°C. The maximum operating pressure on the size of cracks and the conditions of the original pipe.

Low exothermy. Long pot life. Hot curing. Good adhesion on vertical support. Goog thermal and mechanical resistance.

Epoxy laminating system designated to laminating of felt for the reinforcement and replacement of pipes.

Good phsical strengths. Low shrinkage on cure. Fast cure with controlled exotherm. Good adhesion.

EPO 9204 is an epoxy resin designed to provide a tough, flexible barrier liner in services at temperature up to about 50°C. The maximum operating pressure depends on the size of cracks and the conditions of the original pipe.